View Full Version : TG II D&L or Piggy backed to a Marauder???

Dennis in VA
07-10-2006, 07:00 PM
Does anybody out there have any ideas on how to accomplish this?

07-10-2006, 09:42 PM
here's one way - it's not as quick to attach as D&L, but doesn't take too long either. it's very quick to remove:
you need four repair/split ladder locs like this, or equivalent:

install them on the sides of the marauder. when you fold back and stow the TG II waist belt between the TG II and marauder, the loose ends of the upper and side deltas will be hanging loose. just thread them through the ladder locs in the marauder and cinch the TG II tight to the marauder. when you want to detach the TG II, it should take less than 10 seconds to relieve tension and pull them back out. took a pic for you to illustrate it.

07-11-2006, 06:52 AM
Hey Dennis,

I posted this a while back from my home account: http://forums.kifaru.net/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001404

There are some disadvantages in that you can't really open the TGII all the way with it docked and locked like that. Also, if you run the D&L strap through the common loop like I show it, you can't get the TGII open all the way even if it's off the pack. You probably don't need to use the common loop like that but it's something to watch out for.

John Y
07-11-2006, 08:53 AM
You may check the table below:
Kifaru Piggyback Wrap Kit is OK for TG I & II and Marauder.

07-14-2006, 09:36 AM
Here is what I do to piggyback my TG1 to my Zulu. The idea is MM's.

http://forums.kifaru.net/ubb/ultimatebb.php?ubb=get_topic;f=1;t=000893;p=1#0000 02

Sorry, I just realized that the TG2 doesn't have side PALS.